MS G 500 Specifications

Mechanics

Number  of CCD

1 top side horizontal

Type of CCD

Colour (RGB)

CCD Pixel size

10 µm – 35 µm selectable

Data source

Gerber only

MS G 500 Max scan area(x/y)

17.7” x 19.6”

450mm x 500mm

Min scan size (x/y)

1.18” x 1.18”

30mm x 30mm

Scan Speed

6,3”per second, single side

160mm per second, single side

Detection  mode

Image Contrast comparison & logic computing

Detectable  Defects           

SM on Pad, Exposed Copper, Dishdowns, Trace Nicks, Broken SM Bridges, Missing SM, Legend Defects, Foreign Material Inclusions, Gold Defects, Discoloration, Contamination, etc.

Surface Finish

HASL, Immersion Silver & Gold, Bare Copper, OSP, etc.

Defect sorting

Good / Bad Stacker

Defect Confirmation

Online on Scanner or Offline on VRS

Electronics

Test voltage 20V up to 1000V (adjustable)
Test current 5mA up to 500mA (adjustable)
Continuity test 1Ω up to 5000Ω (dependent on the current, smaller current = larger resistance)
Isolation test 1 M Ω up to 500 M Ω

Software

Operating Software Windows 10 (English Version)
User Interface Gardien FPX Software with multi language support ( English Chinese, Japanese, Spanish)
Data input formats

MNF1, MNF2, IPC 356A/B, EMMA

Test Floor Integration IT based communication and data exchange between Universal Grid, Flying Probe and Verification SW

Options 

Hardware  
Vacuum plate: Single Sided for Flex / Thin core / Inner layer (min Board thickness 3mil/80μm)
Multi Board (Quick frame)  
Software  
Data preparation software (Certified Ucamco)  
Verification software (Certified Ucamco)  
Test Floor Integration (TFI) capability  

Dimensions & Environmental conditions

Width 117" 2,980mm
Depth 39" 992mm
Height 80" 2,030mm
(without status light)
  92" 2,330 (with light)
G90XL Weight 6,173lbs 2,800kg
G90XXL Weight 6,393lbs 2,900kg
Air humidity 45-65% - not condensing
Room temperature 64° - 90°F 18-32 °C
Power supply 400V, 50/60Hz, 1000W 3 phase

Click here to open the flyer